15% OFF arrow_drop_up
Skip to content

Join our rewards club and start earning on every purchase today

Get in touch with us

What Makes Third-Generation UView™ Precast Gels Different?

Protein electrophoresis is an essential part of many laboratory workflows, but what happens after the electrophoresis run can be just as important as the separation itself.

Traditional protein gel analysis often involves additional handling steps before researchers can document their results. NuSep's nUView™ precast gels helped simplify this process by introducing rapid UV-based protein visualization without conventional staining and destaining.

Now, NuSep introduces the third generation of precast gel technology: UView™ Tris-Glycine UV Reactive Precast Gels.

The newest generation takes protein visualization a step further. Instead of opening the cassette and removing the gel before imaging, researchers can now visualize protein bands directly through the cassette using UV illumination.

So, what exactly has changed, and how does UView compare with the previous generation?

 

Understanding the Evolution of NuSep Precast Gels

The development of NuSep's precast gel technology has focused on making protein electrophoresis more convenient and efficient.

Earlier-generation nUView™ gels introduced a UV-reactive formulation that allowed protein bands to become visible in approximately two minutes under UV illumination. This eliminated the need for conventional staining and destaining when performing routine protein visualization.

However, there was still one additional step: researchers needed to remove the gel from its cassette before placing it on a UV transilluminator.

The third-generation UView™ design addresses this limitation by allowing protein bands to be visualized while the gel remains inside its cassette.

This seemingly small change makes a meaningful difference in the post-electrophoresis workflow.

UView™ vs. Previous-Generation nUView™ Precast Gels

The primary difference between the two generations is how protein bands are visualized after electrophoresis.

Feature Previous-Generation nUView™ Third-Generation UView™
UV-reactive formulation Yes Yes
Protein band visualization Approximately 2 minutes Approximately 2 minutes
UV illumination 250–320 nm 250–320 nm
Gel removal required for UV imaging Yes No
Cassette opening required for UV imaging Yes No
Conventional staining required for UV visualization No No
Gel handling after electrophoresis Gel must be removed and rinsed Gel remains inside cassette
Imaging method Exposed gel on UV transilluminator Entire cassette on UV transilluminator

Both generations provide rapid UV-based protein visualization. The key advancement with UView™ is the ability to image the gel without removing it from the cassette.

1. Previous Generation: Remove the Gel Before Visualization

With the original nUView™ precast gels, protein bands can be visualized using ultraviolet illumination without requiring conventional Coomassie staining and destaining.

However, researchers must first remove the gel from its cassette.

The typical workflow involves:

  1. Complete the protein electrophoresis run.

  2. Remove the gel cassette from the electrophoresis tank.

  3. Separate the two halves of the cassette.

  4. Carefully remove the gel.

  5. Briefly rinse the gel with deionized or RO water.

  6. Place the exposed gel directly onto a UV transilluminator.

  7. Illuminate for approximately two minutes to visualize protein bands.

Although this process is considerably simpler than traditional staining and destaining, physically removing the gel introduces additional handling.

Delicate gels can be difficult to manipulate, and improper handling may result in tearing, deformation, or other damage.

2. Third Generation: Visualize Protein Bands Without Removing the Gel

UView™ introduces a more streamlined approach to post-electrophoresis visualization.

With the new cassette design and UV-reactive gel formulation, researchers no longer need to open the cassette or remove the gel before imaging.

The workflow is simplified:

  1. Complete the protein electrophoresis run.

  2. Remove the cassette from the electrophoresis tank.

  3. Place the cassette directly onto a compatible 250–320 nm UV transilluminator.

  4. Illuminate for approximately two minutes.

  5. Visualize and document the protein bands through the cassette.

No cassette opening. No gel extraction. No additional gel handling before visualization.

By eliminating the gel-removal step, UView™ helps reduce hands-on processing, minimizes opportunities for handling damage, and makes protein visualization more convenient.

For laboratories that routinely process multiple gels, reducing these additional steps can contribute to a more efficient workflow.

Why Does Visualizing Through the Cassette Matter?

Being able to visualize protein bands without removing the gel offers several practical advantages.

Reduced Gel Handling

Removing a gel from its cassette requires careful manipulation, particularly when working with thin or delicate polyacrylamide gels. UView™ eliminates this handling step during UV imaging, helping maintain gel integrity.

Simplified Post-Run Workflow

Researchers can move directly from electrophoresis to UV visualization without opening the cassette, releasing the gel, or rinsing the exposed gel surface.

Faster Documentation

With fewer preparation steps between electrophoresis and imaging, laboratories can document their protein separation results more conveniently.

Improved Workflow Consistency

Reducing manual handling steps also reduces opportunities for accidental gel damage or other handling-related inconsistencies.

Does UView™ Change the Way Protein Bands Are Visualized?

The underlying UV visualization concept remains an important feature of both generations.

NuSep's UV-reactive gel formulation allows separated protein bands to become visible under ultraviolet illumination in approximately two minutes.

The recommended UV wavelength range is 250–320 nm.

What changes with third-generation UView™ is that this visualization can now take place through the cassette rather than on an exposed gel.

This means laboratories can retain the benefits of rapid UV-based protein detection while simplifying the imaging process.

Is UView™ Compatible With Existing Electrophoresis Equipment?

The UView™ product line is designed around NuSep's precast gel cassette configurations.

For example, the currently listed UB model is compatible with Bio-Rad Mini-PROTEAN Tetra cell tanks and uses a 10 × 8.5 cm cassette.

As with any precast gel, researchers should confirm cassette dimensions, well configuration, acrylamide percentage, and electrophoresis tank compatibility before ordering.

The available gel concentration and well configuration should still be selected according to the target protein molecular weight range and sample-loading requirements.

Frequently Asked Questions

What is the difference between UView™ and nUView™ precast gels?

Both generations allow rapid UV-based protein visualization. The main difference is that previous-generation nUView™ gels must be removed from their cassette before imaging, while third-generation UView™ gels can be visualized directly through the cassette.

Do UView™ gels require Coomassie staining?

No. UView™ gels support rapid UV-based protein visualization without conventional Coomassie staining and destaining. Additional staining methods may still be used when required by a particular application.

How long does it take to visualize protein bands with UView™ gels?

Protein bands become visible in approximately two minutes under compatible UV illumination.

Do I need to remove the gel from the cassette before imaging?

No. The defining feature of third-generation UView™ gels is that protein bands can be visualized through the cassette without opening it or removing the gel.

What UV wavelength is required for UView™ gels?

A UV transilluminator operating within the 250–320 nm wavelength range is recommended.

Can UView™ gels still be used for downstream applications such as Western blotting?

Yes. Direct cassette visualization simplifies the imaging step, but downstream procedures that require access to the gel, such as transfer for Western blotting, still follow their respective protocols.

Experience the Next Generation of Protein Electrophoresis

NuSep's third-generation UView™ precast gels take the convenience of UV-reactive protein electrophoresis one step further.

By allowing researchers to visualize protein bands directly through the cassette, UView™ removes an unnecessary handling step and makes post-electrophoresis analysis more convenient.

For laboratories looking to simplify their protein gel workflow, UView™ offers a practical advancement in precast gel technology.

Explore the NuSep UView™ Tris-Glycine UV Reactive Precast Gels and discover the next generation of protein visualization.

Browse all NuSep Precast Gels.